20 EN

RECORDING (cont.)

Recording Features

Record One Programme While

Watching Another

 

 

 

Once recording is in progress, all you need to do is to set

 

 

 

the channel controls on the TV for the station you wish to

 

 

 

view.

 

 

 

The programme selected with the TV’s channel controls

 

 

 

appears on the TV screen, while the one selected with the

 

 

 

recorder’s PR buttons is recorded on the tape.

Mode Lock

— To prohibit any operations during recording

Press and hold OK on the remote control for more than

5 seconds. “ ” and “ ” light up on the front display panel. No buttons will function and recording will not be interrupted until the recording ends.

To cancel Mode Lock, press and hold OK again for more than 5 seconds.

When OK is pressed to set Mode Lock, the on-screen display appears and the time counter remains on the TV screen. If the time counter is not necessary, set “O.S.D. (PLAY)” and “O.S.D. (REC)” to “OFF” ( pg. 45, 46).

NOTE:

It is also possible to use Mode lock during Repeat Recording ( pg. 21) and Series Recording ( pg. 26).

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape, or set “REC SAFETY” to “OFF”

( pg. 48).

Record safety tab

Page 20
Image 20
JVC SR-V10E 20 EN, Watching Another, Mode Lock To prohibit any operations during recording, Accidental erasure prevention