JVC SR-V10E Another Video Recorder, Advantages of S-VHS video recorders, Start the source player

EN 41

Edit To Or From

Another Video

Recorder

A
TV receiver	Player	Your recorder
	S-video cable	Audio/video
		cable
Audio/video cable
Video
channel or
AV mode	Another recorder
	Recorder
B TV receiver	Recorder	Your recorder
	S-video cable
		Audio/video
		cable
Audio/video cable
Video
channel or	Another recorder
AV mode
	Player

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

You can use your recorder as the source player or as the recording deck.

A Make connections.

AWhen using your recorder as the source player ...

... connect its AUDIO/VIDEO OUT or AUDIO/S VIDEO OUT connectors to the audio/video or audio/S-video input connectors on another recorder.

BWhen using your recorder as the recording deck ...

... connect its AUDIO/VIDEO IN or AUDIO/S VIDEO IN connectors to the audio/video or audio/S-video output connectors on another recorder.

B Set the input mode of recording deck.

With this video recorder, press AUX (number key “0”) and/or PR to select “L-1” for the AUDIO/VIDEO IN connectors, or “S-1” for the AUDIO/S VIDEO IN connectors, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

C Set the edit mode.

See “PICTURE CONTROL” on page 45.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this recorder as the source player for editing, be

sure to set “O.S.D. (PLAY)” to “OFF” before starting ( pg. 46).

●When you use this recorder as the recording deck for editing, set “O.S.D. (PLAY)“ and “O.S.D. (REC)“ to “OFF“ ( pg. 45,

46)if you do not want to record the operational indicators displayed on the TV screen.

●It is also possible to use the front AUDIO/VIDEO or AUDIO/ S-VIDEO input connectors for the connection. When you use the front connectors, select “F-1” for the AUDIO/VIDEO input connectors, “S-2” for the AUDIO/S-VIDEO input connectors in step 2.