Filename [SR-V10E1a-EN.fm]
Masterpage:Left
16 EN
Page 16 August 19, 2002 10:13 am
PLAYBACK (cont.)
Playback Features Still Picture/Frame-By-Frame
Playback
1Pause during playback.
Push the JOG dial.
OR
Press 9.
2Activate frame-by-frame playback.
Tur n t he JOG dial to the right for forward frame-by-frame
playback, or to the left for reverse frame-by-frame
playback.
OR
Press 9.
OR
Press w or e.
Slow Motion
During playback, turn the JOG dial one click to the left
for forward slow motion. To play in reverse slow motion,
continue to turn the JOG dial to the left after selecting all
the forward direction slow motion modes.
OR
During still picture, press and hold 9 for 2 seconds, then
release. Press 9 and release again to return to still
picture.
OR
During still picture, press and hold w or e. Release to
return to still picture.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR + or – on the remote control to eliminate the
noises.
High-Speed (Turbo) Search
During playback, turn the JOG dial quickly to the left or
right.
OR
During playback or still, press 5 for forward
high-speed search, or 3 for reverse high-speed search.
NOTE:
For short searches, press and hold 5 or 3 for over 2
seconds during playback or still picture. When released, normal
playback resumes.
ATTE NT IO N
●Picture may not appear during high-speed search with an
LP/EP-recorded tape.
●Noise may appear or the picture may appear distorted with
an EP-recorded tape during still, slow motion,
frame-by-frame playback or variable speed search.
●In the high-speed search, still, slow motion or
frame-by-frame playback mode, the picture will be
distorted, and there will be a loss of colour.
●
When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may jitter
vertically momentarily depending on the type of TV being
used.
Clean the video heads using a dry cleaning
cassette — TCL-2 — when:
●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only
with “O.S.D. (PLAY)” set to “ON” (墌pg.46)).
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or
humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
To resume normal playback, press 4 or push the JOG
dial.
To resume normal playback, press 4.
SR-V10E1-EN.book Page 16 Monday, August 19, 2002 10:20 AM