Masterpage:Right-NoTitle0

EN 17

Filename [SR-V10E1a-EN.fm]
Page 17 August 19, 2002 10:13 am
Variable Speed Search

During playback, turn the JOG dial to the right for

forward variable-speed search, or to the left for reverse

variable-speed search.

OR

During playback, press w or e.

●The more times you press, the faster the playback picture
moves.
●To decrease speed, press the button for the opposite direction.
NOTES:
●For speed search, refer to the table below.
●You can see smooth slow motion picture only during 1/2x
slow motion playback.
●You can hear the normal audio track only during 1.5x speed
search.
* PAL SP/LP only
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.

Activate Index Search.

Press w or e (2 or 6). “2 1” or “6 1” is

displayed on the TV screen and search begins in the

corresponding direction.

●To access index codes 2 through 9, press w or e repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press w
twice.
To locate the beginning of D from the current position, press e
once.
●When the specified index code is located, playback begins
automatically.
Skip Search

During playback, press 30 SEC 1 to 4 times to skip over

unwanted sections.

Each press initiates a 30-second period of fast-motion

playback. Normal playback resumes automatically.

Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.

Activate Instant ReView.

Press REVIEW. The recorder power comes on and the

recorder searches for the index code indicating the start

of the last timer-recorded programme. Once it’s found,

playback begins automatically.

●The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
the Instant REVIEW indicator ( ) and “3” blink. To watch
the first of the 3 programmes, press REVIEW three times. The
recorder searches and begins playback automatically. You can
access a programme as far as 9 index codes away from the
current tape position.
●The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (墌pg. 35).
Mode Lock— To prohibit any operations during playback

Press and hold OK on the remote control for more than

5 seconds. “ ” and “ ” light up on the front display

panel. No buttons will function and playback will not be

interrupted until the recording end (unrecorded portion)

or tape end is reached (墌pg.48).

To cancel Mode Lock, press and hold OK again for more

than 5 seconds.

●When OK is pressed to set Mode Lock, the on-screen display
appears and the time counter remains on the TV screen. If the
time counter is not necessary, set “O.S.D. (PLAY)” and “O.S.D.
(REC)” to “OFF” (墌pg. 45, 46).
NOTE:
It is also possible to use Mode lock during Repeat Playback
(墌pg. 18) and Series Playback (墌pg.24).

To resume normal playback, press 4.

Reverse
search Reverse
play
Reverse
slow
motion
Slow
motion
Normal
play
Forward
search
Reverse Forward
–7, –5, –3 –1 –1/6, –1/18
1/18, 1/6, 1/2*
1
1.5*,2, 3, 5, 7
Current position
Index number

To resume normal playback during a Skip Search,

press 4.

SR-V10E1-EN.book Page 17 Monday, August 19, 2002 10:20 AM