JVC SR-V10E specifications Express Timer Programming, 30 EN

30 EN TIMER RECORDING (cont.)

Express Timer

Programming

Before performing Express Timer Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. If the tab has been removed, set “REC SAFETY” to “OFF” ( pg. 48). The recorder will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

ATTENTION

It is impossible to perform timer programming during recording.

If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

Example: To timer-record the programme from 21:00 to 22:00 on 25th December, on channel 1.

A Access the SHOWVIEW screen.

Press PROG.

B Access the Programme screen.

Press START+/–. (If you’re just starting out, “P1” appears.)

The front display panel looks like this:

C Enter the programme start time.

Press START+/– to enter the time you want recording to start.

●Press and hold START+/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

The front display panel looks like this:

D Enter the programme stop time.

Press STOP+/– to enter the time you want recording to stop.

●Press and hold STOP+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the programme date.

Press DATE+/–.

●The current date appears on the TV screen. The date you enter appears in its place.