Connecting/Using a Stereo System, Make connections | JVC SR-V10E

EN 43

Connecting/Using A Stereo System

These instructions enable you to connect your video recorder to your Hi-Fi stereo system (if you have one) and listen to the soundtrack through the stereo.

FM tuner

CD player

	Stereo amplifier
		AUX IN or TAPE MONITOR
		Audio cable
		(not provided)
Speaker	Television	Speaker

Back of recorder

AUDIO OUT

Mains outlet

Make connections.

Connect the AUDIO OUT L and R connectors on your video recorder to the AUX IN or TAPE MONITOR connectors on your stereo system’s receiver or amplifier.

NOTE:

When listening to sound through the connected stereo system, turn the TV’s volume down completely.

CAUTIONS:

●This recorder has a dynamic range of more than 80 dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier. A sudden surge in the input level to the speakers may damage them.

●Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the video playback picture.

Image 43

JVC SR-V10E specifications Connecting/Using a Stereo System, Make connections

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector cover Rear View Close the battery cover until it clicks in place Front Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To Use Connect the recorder to TV Check the contents10 EN Situate the recorder Video Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors Select your country Auto Set Up12 EN Turn on the recorder With AV or S-VIDEO connection Perform Auto Set UpConfirm/Set video channel With RF connection Last-Function Memory Results of Auto Set Up appear on the front display panel14 EN Just Clock Basic Playback Pause during playback 16 ENSlow Motion High-Speed Turbo Search Skip Search Mode Lock To prohibit any operations during playbackVariable Speed Search Index Search Manual Tracking 18 ENNext Function Memory Repeat Playback Start recording Recording Resume FunctionChoose a programme Set the tape speed Accidental erasure prevention Mode Lock To prohibit any operations during recording20 EN Watching Another Repeat Recording Tape Remaining Time Receiving Stereo and Bilingual Programmes Engage the S-VHS ET mode22 EN Super VHS ET S-VHS ET Recording Playback SR-V10E-2 Series Playback24 EN SR-V10E-1 Turn on all components Make connectionsLoad cassettes Start playback 26 EN Series Recording Press 0on the SR-V10E which is recording Set the input mode on both SR-V10EPrepare for recording Start recording Press 7on either of SR-V10E 28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer Programming Enter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode 30 EN Express Timer Programming Press PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position Set the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 32 EN Access the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer mode Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify Programme Recording Recording modeBefore performing the following steps 36 EN Navigation Load a recorded cassette Access the Main Menu screenNavigation Playback Programme Navigation Screen Edit Programme Title 38 ENSelect the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data 40 EN Edit From a Camcorder Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recorders Connecting To a Satellite Receiver Make connections Connecting/Using a Stereo System Select the mode setting Mode SetAccess the Mode Set screen Select the mode We recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingPowered back on Picture reproduction is also linked to this function Set PROG. Navigation to OFF While timer-recording in SP mode46 EN Screen Panel. Then, set S-VHS to OFF. The S-VHS indicator goes off Correction to the luminance signal to enhance detailS-VHS recording mode is selected Setting About Ntsc Playback 48 EN Guide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number Set Auto Channel Set Access the Auto Channel Set screenTuner Set 50 EN View the Confirmation screen Perform Auto Channel SetPress OK Manual Channel Set 52 EN Delete a channel Delete a ChannelChange Station Channel Position Select the item Set Stations a 54 ENSet Stations B Station Name TV Station And ID List Clock Set Access the Clock Set screen56 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data 58 EN Video Channel Set Power Recording 60 EN Other Problems Playback 62 EN Lines S-VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS 64 EN Memo 66 EN