DeWalt WRVS4400N manual Firewall Tab, Wds

Setting Up and Configuring the Router

Firewall Tab

different types of traffic. It automatically maps the incoming packets to the appropriate queues based on QoS settings (in IP or layer 2 header). WMM provides the capability to prioritize traffic in your environment. The default is Enabled.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Help information is displayed on the right-hand side of the screen.

WDS

Configure the WDS (Wireless Distribution System) settings for the device.

WDS MAC Address—Displays the read-only MAC address for the WDS.

Allow wireless signal to be repeated by a repeater—Select Auto or Manual as required.

Remote Access Point's MAC Address—Either enter the MAC address directly, or, if the other AP is on-line, you can click the Site Survey button and select from a list of available APs.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Help information is displayed on the right-hand side of the screen.

Firewall Tab

Configure software security features like SPI (Stateful Packet Inspection) Firewall, IP based Access List, restriction LAN users on Internet (WAN port) access, and NAPT (Network Address Port Translation) to limited services to specific ports. Settings only work when NAT is enabled.

WRVS4400N User Guide 57