Setting Up and Configuring the Router

VPN Tab

Encryption— The Encryption method determines the length of the key used to encrypt/ decrypt ESP packets. 3DES is supported. Notice that both sides of the VPN tunnel must use the same Encryption method.

Authentication— Authentication determines a method to authenticate the ESP packets. Either MD5 or SHA1 may be selected. Notice that both sides (VPN endpoints) must use the same Authentication method.

•MD5— A one way hashing algorithm that produces a 128-bit digest.

•SHA1— A one way hashing algorithm that produces a 160-bit digest.

Perfect Forward Secrecy— If PFS is enabled, IKE Phase 2 negotiation will generate a new key material for IP traffic encryption and authentication. Note: that both sides must have this selected.

Preshared Key— This field specifies a key used to authenticate IP traffic. Both character and hexadecimal value are acceptable in this field. Note: that both sides must use the same Authentication Key.

Inbound SPI/Outbound SPI—The SPI (Security Parameter Index) is carried in the ESP header. This enables the receiver to select the SA, under which a packet should be processed. The SPI is a 32-bit value. Both decimal and hexadecimal values are acceptable. e.g. "987654321" or "0x3ade68b1". Each tunnel must have unique an Inbound SPI and Outbound SPI. No two tunnels share the same SPI. Notice that Inbound SPI must match the other router's Outbound SPI, and vice versa

Status

This field shows the connection status for the selected tunnel. The state is either connected or disconnected.

Buttons

Connect—Establish a connection for the current VPN tunnel. If you have made any changes, click Save Settings to first apply your changes.

Disconnect—Break a connection for the current VPN tunnel.

View Log—View the VPN log, which shows details of each tunnel established.

Advanced Button

Aggressive Mode—There are two types of Phase 1 exchanges: Main mode and Aggressive mode. Aggressive Mode requires half of the main mode messages to be exchanged in Phase 1 of the SA exchange. If network security is preferred, select Main mode.

NetBIOS broadcast—Check the box to enable NetBIOS traffic to pass through the VPN tunnel. By default, WRVS4400Nv2 blocks these broadcasts.

Click the Save Settings button to apply your changes or Cancel Changes button to cancel.

WRVS4400N User Guide

73

Page 78 Page 80
Page 79
Image 79
DeWalt WRVS4400N manual Buttons, Advanced Button
Page 78 Page 80

WRVS4400N specifications

The DeWalt WRVS4400N is a versatile and powerful portable generator designed to meet the demands of both professionals and DIY enthusiasts. With its robust design and advanced technology, it offers reliable power solutions for a variety of applications, including construction sites, outdoor events, and emergency power backup.

One of the standout features of the WRVS4400N is its impressive output capacity. Equipped with a powerful 4400-watt surge and 3500-watt running power, this generator can easily handle heavy appliances and tools. This makes it an ideal choice for contractors who require dependable power on job sites or for homeowners seeking a reliable backup during power outages.

The generator is powered by a reliable 223cc engine, designed for efficiency and longevity. Its fuel tank has a capacity of 4 gallons, providing extended run times of up to 14 hours at a 25% load, ensuring that you have enough power to get through even the most demanding tasks without frequent refueling.

DeWalt's innovative technologies enhance the performance of the WRVS4400N. The generator features an automatic voltage regulation system that ensures a stable output voltage, protecting sensitive electronics from damage. Additionally, it is equipped with a low-oil shutdown feature, automatically turning off the engine to prevent damage when oil levels are too low, further contributing to the longevity of the unit.

Mobility is another key aspect of the WRVS4400N. The generator is designed with a sturdy, compact frame and comes with never-flat wheels, making it easy to transport over various terrains. Its integrated handle allows for easy lifting and maneuvering, ideal for both at-home use and on-the-go applications.

Safety features are also central to its design. The WRVS4400N is equipped with multiple GFCI-protected outlets, ensuring safety when powering tools and appliances. The unit runs relatively quietly, allowing for use in residential areas without causing significant disturbances.

Overall, the DeWalt WRVS4400N is a powerful, efficient, and user-friendly portable generator. Its combination of robust features, innovative technologies, and superior safety mechanisms make it an excellent choice for anyone in need of reliable power in various situations. Whether for work or play, the WRVS4400N delivers performance you can count on.
Top Page Image Contents