IP POWER 9258 USER MANUAL
5. Initial Settings
Initial setting through the Ethernet
1.Open attached CD and save IPEDIT.exe in to your Hardisk , execute IPEdit.exe
2.All the IP 92XX series, like IP Power 9258 IP Kamera 9000 series/IP Video 9100 series in the same subnet of the Ethernet will be found and be display in the window by the software. The default name of IP Power 9258 is IP 9258
.
3.Click the equipment‘s name that you want to edit in the left of the window; it will turn fuscous, the equipment’s name and IP address will display in the windows, you can rename (use numbers and letters). After that, click the update button and the new setting will be work in 20 seconds.
4.Double click the name of the equipment you want to control, the IE browser window will open and connected to this equipment in that Ethernet automatically. You also can type the IP address of the 9258 in the IE browser to open the web page of 9000. We suggest you to update the IE to version 6.0 with SP1 or higher if your IE notices you the security level is too low to open that web page.
NOTICE:
1.Make sure RJ45 network cable have been connected and the 9258 are power on.
- 8 -
