Dialogic IMG 1004 Surface Mounting - IMG 1010

Installation and Setup
16
Surface Mounting - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
Mounting Guidelines
When mounting the chassis, follow these guidelines:
 Do not obstruct air flow to the front or the side vent holes towards the rear of
the unit.
 Allow sufficient room, approximately 76 cm (2.5 ft.), to access the tray.
Procedure
1. If desired, mount the self-adhesive feet to the bottom of the unit to protect the
surface finish.
2. Set the unit on a clean, secure, and level surface.
Next Task
Connecting AC Power or
Connecting DC Power