4. Turn off the water pump.

Brake

The brake (optional item) stops the saw from moving forward or backward unintentionally. DO NOT assume at any time the transmission will act as a brake when at Neutral. Note: On extreme slopes chock the tires to prevent unnecessary saw movement.

1.Push the brake pedal down and pivot it into the left brake groove (on the frame) to engage the brake.

2.Push the brake pedal down and pivot it into the right brake groove (on the frame) to disengage the brake.

Weight Bars

The weight bars provide additional weight to the front of the saw to improve overall performance. The combined weight is approximately 26 lb.

Figure 24: Weights

1.Secure the weight bars to the front of the frame base.

2.Remove the screws to remove the weight bars.

20

Page 24
Image 24
Diamond CC1800 manual Brake, Weight Bars