Diamond CC1800 manual Appendix C, Belt Tension Settings

Appendix C

Belt Tension Settings

Deflection (in.) should be equal to number of inches listed in chart below when force (lb) listed in chart below is applied to belt using tension gauge.

Table 7: Push Saw Belt Tension Settings

Model Number	Engine/Motor Type	Belt	Tension Setting
CC1875E1 XL-P	7.5HP Baldor Electric 1 PH-230V	3VX375	0.23 in. at 5.7 lb Force
CC1810E3 XL-P	10HP Baldor Electric 3 PH
CC1813H XL-P	11HP Honda GX390	3VX335	0.20 in. at 5.7 lb Force
CC1816BV XL-P	16HP Briggs Vanguard	3VX355	0.21 in. at 5.7 lb Force
CC1818HY XL-P	18HP Danfoss Hydraulic	3VX375

Table 8: Self-Propelled Saw Belt Tension Settings

Model Number	Engine/Motor Type	Belt	Tension Setting
CC1875E1 XL-S	7.5HP Baldor Electric 1 PH-230V	3VX375	0.23 in. at 5.7 lb Force
CC1810E3 XL-S	10HP Baldor Electric 3 PH
CC1813H XL-S	11HP Honda GX390	3VX335	0.20 in. at 5.7 lb Force
CC1816BV XL-S	16HP Briggs Vanguard	3VX355
CC1818HY XL-S	18HP Danfoss Hydraulic	3VX375	0.21 in. at 5.7 lb Force
CC1820H XL-S	18HP Honda GX620	3VX355

CC1800XL Concrete Saw Manual 31