14.I/O CABLES
When the panel I/O board PNL-Z32 is used, no cabling or wiring is required to operate the CPU (unless you want to connect to an external IDE drive or floppy drive). However for custom installations as well as development, Diamond Systems offers a cable kit no. C-PRZ-KITwith 9 cables to connect to all I/O headers on the board. Some cables are also available separately.
The mating cable for each I/O connector is listed in the chapter on I/O Headers starting on page 7.
Photo No. | Cable No. | Description |
2 | C-PRZ-01 | 80-wire / 2-cable breakout cable assembly with serial, |
| | parallel, PS/2 mouse/keyboard, power, reset, speaker, & |
| | LED connectors |
6 | C-PRZ-02 | 6-wire Ethernet cable with panel-mount RJ-45 connector |
| | |
3 | C-50-18 | 50-wire data acquisition cable |
| | |
5 | 698004 | 44-wire IDE cable for 1 or 2 drives |
| | |
7 | 698005 | 6-wire auxiliary serial port cable |
| | |
8 | 698006 | 4-wire output power cable for external drives |
| | |
4 | 698008 | 34-wire floppy cable for 1 or two drives |
| | |
9 | 698009 | 9-wire input power cable with stripped/tinned leads for |
| | connection to external power source |
1 | 698012 | Dual USB cable |
| | |
Cable Kit C-PRZ-KIT
Prometheus-LC CPU User Manual V1.0 | Page 34 |
