becomes a reflex action, but always make sure that there is sufficient tension to prevent unintended release of your foot from the pedal.
!WARNING: Clipless pedals are intended for use with shoes specifi cally made to fi t them and are designed to fi rmly keep the foot engaged with the pedal. Using shoes which do not engage the pedals correctly is dangerous.
Practice is required to learn to engage and disengage the foot safely. Until engaging and disengaging the foot becomes a refl ex action, the technique requires concentration which can distract the rider’s attention, causing the rider to lose control and fall. Practice engaging and disengaging clipless pedals in a place where there are no obstacles, hazards or traffi c; and be sure to follow the pedal manufacturer’s setup and service instructions. If you do not have the manufacturer’s instructions, see your dealer or contact the manufacturer.
Never do stunt riding with clipless pedals. If you lose control, your foot could remain engaged in the pedal, resulting in serious injury.
D.Bicycle Suspension
Many bicycles are equipped with suspension systems. There are many different types of suspension systems — too many to deal with individually in this Manual. If your bicycle has a suspension system of any kind, be sure to read and follow the suspension manufacturer’s setup and service instructions. If you do not have the manufacturer’s instructions, see your dealer or contact the manufacturer.
! WARNING: Failure to maintain, check and properly adjust the suspension system may result in suspension malfunction,
which may cause you to lose control and fall.
If your bike has suspension, the increased speed you may develop also increases your risk of injury. For example, when braking, the front of a suspended bike dips. You could lose control and fall if you do not have experience with this system. Learn to handle your suspension system safely.
See also Section 4.A.
!
WARNING: Changing suspension adjustment can change the handling and braking characteristics of your bicycle. Never change suspension adjustment unless you are thoroughly familiar with the suspension system manufacturer’s instructions and recommendations, and always check for changes in the handling and braking characteristics of the bicycle after a suspension adjustment by taking a careful test ride in a hazard- free area.
Suspension can increase control and comfort by allowing the wheels to better follow the terrain. This enhanced capability may allow you to ride faster; but you must not confuse the enhanced capabilities of the bicycle with your own capabilities as a rider. Increasing your skill will take time and practice. Proceed carefully until you have learned to handle the full capabilities of your bike.
!
CAUTION: Not all bicycles can be safely retrofi tted with some types of suspension systems. Before retrofi tting a bicycle with any suspension, check with the bicycle’s manufacturer to make sure that what you want to do is compatible with the bicycle’s design.
19
