Diamondback 1180 Er manual Cardio Program Key

Cardio

Program Key

Workout Programs (continued)

Adjustment

•There is no program setting adjustment allowed during program executing and “UP/DOWN” key will not function at this time.

Pause, Reset, Switch or Save a program

•See Console Operating Tips section for details, page 16.

Ending the Program

•When selected program time is up, there will be a beep to signifying the end of this program.

•The message display will scroll a message “PROGRAM END, TOTAL TIME, DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and Calories” will be displayed for 5 seconds.

•After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS START TO RE-START”. User may stop, re-start, save this program or enter another program during this period of time, see below for details.

•If no key is pressed, it will resume back to scroll a message “PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be repeated for 30 seconds and the console will be reset.

Stop this program

To stop this program, simply press “STOP” key once or stop pedaling. The console will be reset to idle mode. No workout data will be saved for next workout.

Re-start this program

To re-start this program, press “START” key once during this 30 seconds period. This program will be re-started. Time, distance and calories will be continued accumulating.

Save this program

•To save this program, see Console Operating Tips section for details

•After this program is saved, the message window will resume to display: “PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another key is pressed or 30 seconds is up.

Enter another program

User may enter another program during program ending by pressing another program key, see Console Operating Tips section for details.

Getting Started

The Cardio program is designed to keep you heart rate at your anaerobic stage. The heart rate is maintained at 80% of Max heart rate to develop your lactic acid system and build your strength most effectively. The LED displaying on the dot matrix window represents the % max HR profile, 0% as the 1st row and 100% as the 10th row. The blinking one is your current % max HR and the right side ones are the targeted 80% max HR.

A HEART RATE MONITORING DEVICE MUST BE USED FOR THIS PRO- GRAM. FOR BETTER RESULTS, A CHEST STRAP IS RECOMMENDED FOR THIS OPERATION.

Workout Programs (continued)

IMPORTANT: It is unsafe to exceed 95% of your maximum heart rate while exercising. Please consult your physician before performing any Heart Rate based training program.

Beginning the Program

During idle mode, the message window displays a message “SELECT A PROGRAM”. Press “CARDIO” key to enter this program. Its program LED indicator will light up.

Accepting default values or Entering the program setup mode

When the CARDIO key is pressed, the message window will scroll a message “PRESS ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.

•Press “START” key to accept current default values and begin Cardio program workout.

•Default Time = 30 minutes

•Default % Max HR = 80%.

•Or press “ENTER” to enter program setup mode. The message display will take you through the program setup mode step by step as below:

Entering Age

1.If Enter key is pressed, the message window will scroll a message of “ADJUST AGE AND ENTER TO ACCEPT”, then “AGE = XX” will be blinking.

2.You may press “UP/DOWN” key to adjust the age.

3.After age adjustment, then press “ENTER” to accept and enter weight adjustment.

Entering Weight

1.If Enter key is pressed, the message window will scroll “ADJUST WEIGHT AND ENTER TO ACCEPT”, then “WEIGHT = XXX LB” will be blinking.

(WEIGHT = XXX KG” for metric system)

2.You may press “UP/DOWN” key to adjust the weight.

3.After weight adjustment, then press “ENTER” to accept and enter Time adjustment.

Entering Time

1.If Enter key is pressed, the message window will scroll a message of “ADJUST TIME AND ENTER TO ACCEPT”, then “TIME = 30 MIN” will be blinking.

2.You may press “UP/DOWN” key to adjust the program time

3.After time adjustment, the program setting is now completed. Press “START” key to start the Cardio program.

During the Program

Display

•This program will not be started until a valid pulse is detected. If no pulse is detected, the message window will display “CHECK YOUR PULSE”. Make sure your heart rate device is properly operated.

•Once the program is started, the message display will turn into workout data display and display four default data: time, level, calories & strides/min.

•Press “SELECT” button next to the data display window to select your desired data display.

36			37
	1180 Er Owner’s Manual	1180 Er Owner’s Manual