BodyFit Angle Adjustment, Console Assembly

Assembly Instructions

harness during this procedure, as this will damage the electronic console.

Step 5: Console Assembly

1.Connect both plugs, from main wire harness and hand pulse harness, to the plug receptors on the backside of the console, taking care to install correctly (see plug alignment marks). WIRING HARNESS INSTALLATION HINT: Any excess wiring must be carefully inserted (“storied”) back into the console mast before installing the console onto the console mounting plate.

2.Fasten the console to the console mounting plate with the four M5 x 12mm screws and washers, using a Philips screwdriver.

Step 6: Water Bottle & Leveling Pads

1.Place the water bottle into the water bottle holder.

2.Adjust the leveling pads if necessary, located on the front stabilizer bottom, to ensure your equipment is leveled with floor.

BodyFit Angle Adjustment

The 1180Er is equipped with bodyfit ellipse angle adjustment system to fit your exercise better. The different ellipse angle will change the form of your elliptical exercise; the higher ellipse angle will make your elliptical motion feel more like an Uphill Climbing and the lower ellipse angle will make the ellipse motion feel more like a Skiing/Jogging exercise. The different ellipse angle will result in different dif- ficulties of exercises even though you are in the same resistance level.

The Difference in Ellipse Angle:

There are 3 angle adjustments on the 1180Er — Position 1–3, position 1 being the position closest to user and position 3 being farthest away from user. See figure on the right.

At position 1, the ellipse angle is 9 degrees higher than position 3 and the step motion will feel more like hill climbing. It also will bring you closer to the console mast.

At position 3, the ellipse angle is more flat and feels more like a sprint. It also push- es user away from the console mast.

In order to get the best workout experience, it is recommended to try all three posi- tions first. Find the best one to fit your workout preference and your body features and adjust it for your workout.

Adjusting the Ellipse Angle:

To adjust the position of the footpad, please follow below steps for adjustment:

1.Turn the adjusting knob clockwise all the way down to loosen the pivot structure. See figure on the right.

2.It is recommended that you step on the floor and face the back of the console. Then put both hands under handles and raise the pivot structure.

3.Move the pivot structure to the next desired position and rest it down. Make sure the pivot axle is inside the groove securely.

4.Turn the adjusting knob counter clockwise to tighten the knob. Make sure there is no additional movement on the pivot structure after locking and the whole structure is securely locked in place.

Caution: Not tightening down the adjusting knob properly may result in a fall or injury

Positions:

Ellipse angle	Position 1
Difference

Front

Position 3

Pivot Structure

Loosen

Tighten

Adjusting Knob

8				9
	1180 Er Owner’s Manual		1180 Er Owner’s Manual

1180 Er specifications

The Diamondback 1180 ER is a high-performance tactical vehicle, designed for versatility, durability, and operational efficiency in a variety of challenging environments. With a focus on advanced technology and robust engineering, the 1180 ER serves as a reliable platform for military and law enforcement agencies.

One of the standout features of the Diamondback 1180 ER is its modular design. This allows it to be easily configured for various missions, from reconnaissance to command and control, and even personnel transport. The vehicle's body is built with lightweight composite materials, ensuring optimal protection while minimizing weight. This feature enhances mobility and allows for a faster response in critical situations.

Powered by a potent diesel engine, the 1180 ER delivers impressive power and torque, enabling it to traverse rough terrain without compromising speed. The advanced suspension system provides superior handling and stability, making it suitable for urban environments as well as rugged off-road conditions. This adaptability is one of the key advantages of the vehicle, allowing operators to remain agile under varying operational demands.

The Diamondback 1180 ER also boasts state-of-the-art navigational and communication technologies. Equipped with integrated GPS and advanced communication systems, it ensures that troops maintain connectivity and situational awareness, even in remote areas. This technology enhances coordination during missions and improves the overall effectiveness of operations.

In terms of defensive capabilities, the 1180 ER is outfitted with ballistic protection, safeguarding personnel from potential threats on the battlefield. The vehicle can be equipped with additional armor packages and defensive systems, offering customizable protection that meets mission-specific requirements.

The ergonomic interior of the Diamondback 1180 ER ensures comfort for personnel while enabling quick access to controls and equipment. Ample space allows for a team of operators and gear to be transported efficiently, making it an invaluable asset during extended missions.

In conclusion, the Diamondback 1180 ER is an exemplary mix of innovation, versatility, and resilience, capable of meeting the diverse needs of military and law enforcement operations. With its modular design, powerful engine, advanced technology suite, and robust protective features, it stands out as a leader in the tactical vehicle market, ensuring that operators can execute their missions effectively and safely, no matter the scenario.

Diamondback 1180 Er BodyFit Angle Adjustment, Console Assembly, Water Bottle & Leveling Pads

Models: 1180 Er