Telephone Access Interface

1.Dial up the iSwitch.

2.After three rings the iSwitch will respond by sending out three short beeps to the caller. Then the iSwitch waits for the user to enter the password.

3.The user enters an access password (default password is 123456789#).

4.The iSwitch will send out three short beeps to confirm a successful login, or one long beep to deny access.

5.Once logged in, the remote user can punch in 4-8 digits. The first two digits specify which iSwitch, the next digit specifies which output receptacle and the next digit specifies which command. The last four digits specify the amount of time:

Command format: XXNA#:

XX - 00—16 is the iSwitch’s device number for a daisy chain, if there is no daisy chain, then any number is accepted.

N - outlet number: 1(A)—8(H), 9 controls all the outlets.

A - action type: 0=off, 1=on, 2=reset.

I.E. 0111# RPM01 turn on Outlet A.

I.E. 0120# RPM01 turn off Outlet B.

I.E. 0212# RPM02 reset outlet A.

I.E. 01113600# means turn A on after 3600 minutes.

I.E. 01103600# means turn A off after 3600 minutes.

I.E. 01123600# means reset A after 3600 minutes.

6.Use a combination of 0111XXXX# or 0112XXXX# to get a different delay time. XXXX max value is 9999, which is about 166 hours or 6.94 days.

7.Use the "*" key to cancel a command at any time.

8.The iSwitch will acknowledge the receipt of the commands by issuing 2 short beeps. A long beep indicates a failure or a non-recognizable command.

9.To change the password. The default password is 123456789#. The user has to enter the previous password in order to change their password.

NOTE: The Password has to have a minimum of 7 digits and can have a maximum of 10 digits.

10.The user enters 888# or whatever previous password. Then the iSwitch responds with three short beeps acknowledging access granted. The user then enters the new password as follows: 888XXXXXXXXXX#, and the iSwitch acknowledges with 2 short beeps. Then user inputs 888XXXXXXXXXX# the second time to re-confirm the new password. The iSwitch acknowledges with 4 short beeps, indicating that the password has been changed.

11.Hang up to close any access.

12.Forgot telephone interface password? Please do the following steps to restore the default password.

a.Dial up the iSwitch.

b.After three sequence rings, the iSWITCH will respond by sending out 3 short beeps to the caller and waiting for user to enter password. Then pressing the button A and H simultaneously on the iSwitch within twenty seconds.

c.When the LED A and H blinking, release the two buttons, the iSWITCH will respond by sending out 4 short beeps to the caller. The password will be restored to default.

13.The iSwitch is in a waiting loop to receive the command string. Each command string should be entered within 20 seconds. After 180 seconds without any user input, the iSwitch will logout the user.

14.The 9 command set is for the administrator: 0190# to turn every port off.

0191# to turn every port on.

0192# to reset every port with a delay of 8 minutes, which will allow safe shutdowns. The delay can be changed by command 888911XXXX#, where XXXX can range from 1 to 9999 minutes.

15.The user enters 000# that can force to break connection with iSwitch.

45

Page 44 Page 46
Page 45
Image 45
DigiPower ePowerSwitch user manual Telephone Access Interface
Page 44 Page 46

ePowerSwitch specifications

DigiPower ePowerSwitch is an innovative solution designed to provide users with comprehensive control over their power management systems. Its advanced features and technology make it a leading choice for those seeking to enhance their energy efficiency and simplify their power management processes.

One of the main features of the ePowerSwitch is its ability to remotely manage power outlets via a user-friendly web interface or mobile application. This functionality allows users to turn devices on or off, schedule operations, and monitor energy consumption from anywhere, ensuring greater flexibility and control. The ability to manage power remotely not only increases convenience but also helps in reducing energy costs by allowing for better management of the devices.

The ePowerSwitch uses intelligent power monitoring technology that provides real-time energy consumption data. This enables users to track energy usage patterns, identify energy hogs, and optimize their systems for improved efficiency. Additionally, users have access to historical data and trends, allowing for informed decision-making regarding energy management.

Another impressive characteristic of the DigiPower ePowerSwitch is its robust security features. It employs advanced encryption protocols to ensure secure communication over the network, minimizing the risk of unauthorized access and enhancing the protection of connected devices. Users can also set access controls to determine who can manage the ePowerSwitch, adding another layer of security.

Compatibility is yet another important aspect of the ePowerSwitch. It supports a wide array of devices and integrates seamlessly with existing power management systems in homes, offices, and industrial setups. This versatility makes it an ideal solution for diverse applications, from residential energy management to professional IT environments.

In addition to these features, the ePowerSwitch is designed with sustainability in mind. Its energy-saving capabilities help organizations reduce their carbon footprint by promoting the efficient use of power. This aligns with the growing emphasis on eco-friendly practices in both businesses and homes.

Overall, DigiPower ePowerSwitch stands out as a reliable, efficient, and user-friendly solution for power management. With its impressive array of features, intelligent technologies, and commitment to security, it serves as an essential tool for users seeking to enhance their energy management strategies and improve overall efficiency. The DigiPower ePowerSwitch is certainly a forward-thinking solution for the modern energy-conscious consumer.
Top Page Image Contents