Section Four - Other Functions
Expression Pedal
The Expression Pedal on the RP300A can be assigned to control the RP300A’s Volume, Whammy™,Ya Ya™, or just about any other parameter in real time with your foot. When a parameter has been assigned to the Expression Pedal, a programmable minimum and maximum value can also be assigned. The procedure for assigning a parameter to the Expression Pedal is as follows:
1.Press the Select button until the Expression row has been selected (indicated by the LED lighting on the Expression row).
2.Rotate the Number 1 Knob until the word PEDAL appears in the Display.
3.Rotate the Number 2 Knob until the desired Parameter appears in the Display. Your
choices include:
A GAIN (Amp Gain) - Expression Pedal controls the Amp Gain or amount of distortion for the selected Amp Type.
AMPLVL (Amp Level) - Expression Pedal controls the Volume of the selected Amp Type.
Modulation Effects Parameters
Active Effect | Available Parameters |
Chorus | SPEED (Speed), DEPTH (Depth) |
Flanger | SPEED (Speed), DEPTH (Depth), REGEN (Regeneration) |
Triggered Flanger | SPEED (Speed), SENSTV (Sensitivity), LFOSTR (LFO Start) |
Phaser | SPEED (Speed), DEPTH (Depth), REGEN (Regeneration) |
Triggered Phaser | SPEED (Speed), SENSTV (Sensitivity), LFOSTR (LFO Start) |
Tremolo | SPEED (Speed), DEPTH (Depth) |
Vibrato | SPEED (Speed), DEPTH (Depth) |
Rotary Speaker | SPEED (Speed), DEPTH (Depth), DOPLER (Doppler) |
Panner | SPEED (Speed), DEPTH (Depth) |
YaYa™ | PEDAL (Pedal), DEPTH (Depth), RANGE (Range) |
Auto Ya™ | SPEED (Speed), DEPTH (Depth), RANGE (Range) |
SynthTalk | ATTACK (Attack), RELEAS (Release), VOX (Vox), SENSTV (Sensitivity) |
Envelope Filter | AMOUNT (Amount), SENSTV (Sensitivity) |
Detune | AMOUNT (Amount) |
Pitch Shift | AMOUNT (Amount) |
Whammy™ | AMOUNT (Amount) |
YAYA (YaYa™) - Expression Pedal acts as a Ya Ya™ Effect when YaYa™ is engaged. WHAMMY (Whammy™) - Expression Pedal acts as a Whammy™ Pedal when Whammy™ is
engaged.
EFFLVL (Effect Level) - Expression Pedal controls the Mix Level of the selected Modulation Effect Type.
FBACK (Feedback) - Expression Pedal controls the amount of Delay Feedback.
DLYLVL (Delay Level) - Expression Pedal controls the Mix Level of the selected Delay Type. DECAY (Decay) - Expression Pedal controls the length of Reverbs Decay time.
REVLVL (Reverb Level) - Expression Pedal controls the Reverbs Mix Level.
VOLPRE (Volume Pre) - Expression Pedal controls the Volume after the Amp Modeling but before the Effects.
VOLPST (Volume Post) - Expression Pedal controls the Volume at the end of the Effects chain.
3.Rotate the Number 3 Knob to select the minimum value the assigned parameter will reach with the Expression Pedal in the toe up position (not available when volume is the assigned parameter).
4.Rotate the Number 4 Knob to select the maximum value the assigned parameter will reach with the Expression Pedal in the toe down position (not available when volume is the assigned parameter).
5.Store your Expression Pedal assignment to your Preset. See page 9 for more information on the storing procedure.
18
