Operation
Figure 9
Top Light Dimmer |
Thermostat |
Heater On/Off Switch |
Main On/Off Switch |
A. Main On/Off Switch
The switch has two ON positions marked with 
and “ON”.
The “ON” position is for manual operation. In this position the
The 
position is for operating the unit with the provided remote control.
When in 
position the unit is operated with the ON and OFF buttons of the remote control.
When the switch is in the center position the unit is off.
B. Heater On/Off Switch 
The Heater On/Off Switch supplies power to the heater fan and the heater element.
When the switch is in the ON position the heater operates if the thermostat calls for heat.
C. Heater Thermostat Control 
To adjust the temperature to your individual requirements, turn the thermostat control upward all the way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob downward until you hear
a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn upward until you hear the click again and the heater will turn on.
D. Top Light Dimmer Control
The top Top Light Dimmer Control controls the brightness of the top accent light that is used to illuminate the pebbles.
14 | www.dimplex.com |
