Fireplace Installation
⑦With the glass assembly taken off, mount the firebox onto the two (2) mounting screws.
⑧Mark position of hole “H”.
⑨ Remove fireplace from wall.
⑩Install drywall anchor into drywall at marked position.
⑪With the glass assembly off, mount the fireplace onto the two
(2) mounted screws.
⑫Tighten both mounting screws with a screwdriver. Be careful not to over tighten the screws mated
Figure 4
with the drywall anchor.
⑬Secure Philip’s screw into drywall anchor, already in the wall.
⑭Open bag of black pebbles and gently pour through top opening of front glass assembly.
⑮Install glass assembly as shown in Figure 4.
Built-In Instructions
WARNING: The installation of the fireplace unit must comply with the applicable local and/or national electrical codes and utility requirements. This
Ensure Glass
Assembly
brackets engage hooks on fireplace by sliding Glass Assembly towards fireplace and then down
Secure Glass
Assembly with the four (4) supplied
10 | www.dimplex.com |
