DRW-35

To disarm the security system,

turn the ignition to the ON posi- tion. Press the Valet button the preset number of times (one to

five times) within 15 seconds. After five seconds, the system will disarm. If the system does not disarm, you may have waited too

long; turn the ignition off and on and try again.

Location of Valet Button_________________________________

Number of Presses_____________________________________

important! The Valet® switch can be programmed to respond to 1-5 presses for the disarm function. You must check with the installer to verify the programming for your individual unit.

➜silent mode

To temporarily turn off the arm or disarm chirps, use Silent

Mode™. Simply press for less than one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that one operation only. If you want the arm/disarm chirps turned off permanently, your dealer can do this for you.

note: The Warn Away® response to lighter impacts is bypassed if the system is armed using Silent Mode. This ensures that no chirps will be emitted by the siren in an area you want chirp-free. The system is still fully capable of triggering. Only the Warn Away® response is bypassed.

© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .

15