3.Press .

4.Press again.

The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode.

➜remote start

This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle.

important! (1) Never remote start your vehicle when the keys are in the ignition, except when performing Valet® Take-Over, and (2) Never start the vehicle if it is not in either PARK or NEUTRAL.

To remote start the vehicle:

1.Press on the transmitter twice within 3 seconds.

2.The parking lights will flash to confirm that the vehicle will attempt to start.

3.In gasoline vehicles, the engine will start 4 seconds after the parking lights flash. In diesel vehicles, the engine will start when the WAIT-TO-START indicator on the vehicle's dash goes out.

4.Once the vehicle has started, it will run for the pre-program-

© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .

17