med period of time (either 12, 24, or 60 minutes - see Programming Options section of this guide) or until a shutdown input is triggered.

important! It is unsafe to operate a vehicle’s motor in a garage or other closed off area. Breathing the exhaust from the vehicle is hazardous to your health. Never activate the remote start in an enclosed space.

When you are ready to drive the vehicle:

1. Insert the ignition key and turn

it to the ON (not START) posi-

tion.

2. Press the brake pedal.

note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down.

While the vehicle is running during remote start operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut-down inputs:

➤The brake pedal is pressed.

➤The hood is opened.

➤The shutdown toggle switch is put into the OFF position.

➤The pre-programmed run time (12, 24, or 60 minutes) has elapsed.

➤Transmitter buttons is pressed twice within 3 seconds.

18

© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .