➜valet take-over

The Valet® Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on.

To perform Valet® Take-Over:

1.Before turning off the engine, press and release twice within 3 seconds on the transmitter (or press and release the

optional momentary switch). Then wait five seconds.

2.Turn the ignition key to the OFF position. (The engine will stay running.)

3.The engine will run until the pre-programmed time elapses or a shut-down input is received. (See the previous Remote Start section for a complete list of shut-down inputs.)

note: This feature will not work if the brake pedal is being pressed.

© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .

19