power saver mode
Your system will automatically enter Power Saver Mode while armed or in Valet® Mode, after a period of time in which no operation has been performed. This lowers the current draw on the vehicle's battery. Power Saver Mode takes over under the following conditions:
➤Power Saver when the system is armed: After the system has been armed for 24 hours the LED will flash at half its normal rate, decreasing the system's current draw.
➤Power Saver in Valet® Mode: When the system enters Valet® Mode the LED illuminates steadily. If the vehicle is not used (ignition is not turned on) for a one hour period while the system is in Valet® Mode, the LED will shut off. If the system remains in Valet® Mode, the LED will come back on the next time the ignition is turned on and then back off.
programming options
Programming options control your system's normal, operational
The following is a list of the programmable options, with the factory settings in Bold.
➤Active arming (transmitter only) or passive arming (auto- matic arming 30 seconds after the last door has been closed).
30 | © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c . |