➜panic mode
If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter. Just
press 
for two seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time,
press 
on the remote transmitter again.
➜valet mode
You can prevent your security system from automatically arming and triggering by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the security system will not arm, even with the remote transmitter, but all convenience functions (door locks, trunk release, etc.) will continue to work normally.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet switch
within 10 seconds.
The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode.
To enter or exit Valet Mode using the transmitter:
1.Open any vehicle door.
2.Press 
.
16 | © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c . |