DirecTV HIRD-E86 manual HD Receiver with HDTV Monitor and VCR

Setting Up Your HD Receiver

HD Receiver with HDTV Monitor and VCR

Follow these steps indicated by the diagram following this text.

1)Connect the satellite dish antenna and terrestrial antenna or cable service to the HD receiver following the instructions in “HD Receiver and Satellite Dish Antenna with Terrestrial Antenna or Cable Service” on page 2-3.

2)Connect one set of Component Video Cables (one green Y connector, one red Pr connec- tor, and one blue Pb connector) to the back of the HD receiver using the connections marked Y, Pr, and Pb. Connect the other ends of this cable to the back of the HDTV monitor using the HDTV input connections marked Y, Pr, and Pb.

Note: Connect the Y, Pr , and Pb connectors of the HD receiver only to the Y, Pr , and Pb connectors on your TV that are compatible with HD signals in the

Page 2-5