Hughes Model
Filters
The default setting for Filters is “Temporary.” With a setting of “Temporary,” each time you leave the
Translucency
The TRANSLUCENCY option allows you to set the degree of translucency in menus and screens that overlay video.
Advanced Preferences
Highlighting the Advanced button on the PREFERENCES screen and pressing the SELECT key on the remote control will display the ADVANCED PREFERENCES screen shown at right. This screen contains additional preferences that are less likely to require changes once they are selected. Most users will not make any changes to this screen. This screen also provides a means to reset all preference settings to the factory default settings.
Done | The ADVANCED PREFERENCES screen |
Highlighting the Done button on the screen and pressing the SELECT key on the remote control causes
an exit from the ADVANCED PREFERENCES screen and a return to the PREFERENCES screen.
Video
Highlighting the Video button on the screen and pressing the SELECT key on the remote control will return you to the last program you were viewing.
Advanced Preference Options
On the right of the ADVANCED PREFERENCES screen is a panel of option buttons and their related current settings: Receiver ID, Channel Lock, and Factory Defaults, which are explained below.
Receiver ID
Someday, you may choose to get a second HD receiver. If both receivers are in the same home or if you are using an RF remote control or a remote control extender, you may experience interference between signals. To avoid this “cross talk,” simply highlight the Receiver ID button and press SELECT on the remote control to be used for that specific HD receiver. Remember to set your remote control to the desired code first. For information regarding changing the remote control code, see Chapter 8, “Changing the Remote Control Address to Operate Other HD Receivers.”
Page