Hughes Model
Displaying the INSTALLATION Screen
Highlighting the Installation button on the POWER-
ON screen (explained on page
SELECT key on the remote control will display the
INSTALLATION screen shown on the right.
If this is not the first time the HD receiver is turned on after being plugged in, follow these steps:
●Open the MAIN MENU screen by pressing the ACTION key followed by the GUIDE key on the remote control.
● Using the ▲ and ▲ keys, highlight the Setup
Menu Button then press the | SELECT key on | The INSTALLATION screen |
|
the remote control to display the SETUP menu.
●Using the ▲ and ▲ remote control to
keys, highlight the Installation Button then press the display the INSTALLATION screen.
SELECT key on the
Selecting the Correct Type of Satellite Dish Antenna
You need to select the correct type of dish antenna that you have connected, so that the HD receiver can calculate the correct coordinates for pointing the dish antenna.
Highlighting the Dish Setup button on the INSTALLATION screen and pressing the SELECT key on the remote control will display the DISH SETUP screen. Highlighting the Dish Type button on the DISH SETUP screen and pressing the SELECT key on the remote control will display the DISH TYPE
to the HD receiver and then press the | SELECT key. |
Dish Type Selections | The DISH SETUP |
Note: You must select the correct
dish antenna type to obtain correct pointing results.
These are the following dish antenna type selections:
None | Highlight this selection if you are not connecting a dish antenna, but are |
| connecting a terrestrial antenna or cable signal. |
Round Dish | Highlight this selection if you connected an 18" round dish antenna. This |
| setting allows the HD receiver to receive a signal from the main satellite, |
| located at 101°. |
| Note: A round dish antenna will not receive High Definition satellite signals |
| from DIRECTV. |
Page