Hughes Model
PreSelecting Programs for Taping
You can utilize this feature commonly known as StarSight®
identified with a videotape icon ( 
) before the program title on the
recorded, press the SELECT key again to change the setting to be automatically tuned to for viewing.
When using the To Tape feature the following steps must be completed for the HD receiver to perform unattended recording:
Note: Only the OUT TO TV or Audio/Video/or
●Attach the VCR Control cable. (See Chapter 2, “Setting Up Your Satellite Receiver.”)
●Use the VCR SETUP screen. (See Chapter 7, “HD Receiver’s Menu System.”)
●Switch the HD receiver to SD (480i) output mode.
●Set your VCR to match the output of the HD receiver. This could be either RF (channel 3 or 4) or A/V (audio left and right with video or
●Insert a recordable videotape of sufficient length in the VCR.
●Leave the VCR turned ON.
PreSelecting Programs for Viewing
Programs that are PreSelected for viewing will be identified on the
Canceling PreSelected Programs
To cancel a PreSelected program, find the upcoming program you wish to cancel and press the SELECT key until the check mark (✓) or videotape icon ( 
) is no longer shown.
If the program is currently airing, you will need to delete the event from the SCHEDULER screen accessed from the MAIN MENU.
Page
