Instructions | Additional Information |
5Scroll the Sort By: (or
Aux Device:) list to position the option you wish to select within the blue highlight bar. Then highlight your device’s name in the Brand: list and select Next.
6The next screen displays the number of device codes available for the selected brand, and which code is ready for you to test.
7Press and release the mode button for the device you are setting up (TV, DVD, or AUX).
8Press POWER to turn off your equipment. If your equipment turns off, continue with step 9. If it does not turn off, press and release the SAT button to switch modes. Then select No on screen and repeat steps 7 and 8 for the next code.
9While still in the same device mode (TV, DVD, or AUX), turn the equipment back on and try some other buttons to make sure they work. When you are done, press and release the SAT button to switch modes.
If the brand is not listed, see Entering Equipment Codes on page 5. If there is no equipment code for your device right now, you can check to see if one has been added after your receiver’s next scheduled software update.
There may only be two or three device codes for your specific equipment, or there may be dozens of codes available for certain brands.
If you are setting up a TV, you can remain in SAT mode and press the TV POWER button in step 8.
If the code you selected works, your equipment should turn off. If the code you selected does not work, test each code until one turns off your equipment. If you do not want to continue testing codes but know your device’s model, you can select Enter Model and use the on- screen alphanumeric keyboard to search the database for all or part of the model name/number.
For example, sometimes the remote’s POWER button works when other buttons do not. Also, note that more than one code may work to turn your equipment on or off Choose the code that best allows you to control your equipment.
4
