COLORED BUTTONS
The following table lists some of these shortcuts for the colored set of buttons on your ViP922 DVR remote control. Note that scheduled updates to your receiver software may add to or modify these shortcuts.
REMOTE BUTTON | FROM LIVE TV | SCROLLS IN LISTS |
RED | Jumps to menu bar | Jumps to menu bar |
GREEN | Access Quick Clicks list | No |
YELLOW | Access Settings screen | No |
BLUE | Access Broadband Setup | No |
LOCATING A LOST REMOTE
The next time you misplace a remote control or wonder where one is, you should try the new Locate feature, as follows:
1Access the System Info screen on your ViP922 DVR receiver by activating your receiver’s front panel controls and touching SYSTEM INFO, or pressing MENU twice on another linked remote control. The
2If the remote control you want to find is listed, select the Locate option next to it. Wait a few seconds, listening for the remote to emit a series of tones.
If the remote control you want to find is not listed, it is not linked to the receiver or is out of RF range. Using Locate isn’t an option.
3If the missing remote control is linked to this receiver and within RF range, then you should hear a series of tones you can use to help you find the location of the remote. When you have located the missing remote, press any button to turn off the Locate tones.
USING THE SYSTEM WIZARD
By pressing and holding down the 0 (zero) numeric key on your remote control, you can access the System Wizard. The wizard can help you backup and restore the settings for your ViP922 DVR system in both your remote control’s memory, and on the receiver. This is helpful if you ever need to program a replacement remote or new ViP922 DVR. To use the wizard, follow the
11
