SWITCHING BETWEEN TV AND AMPLIFIER VOLUME CONTROL
If a remote control used with the ViP922 DVR has been set up to operate a TV, then MUTE and VOLUME +/- buttons adjust the TV’s volume. To use the remote to adjust the volume of your remote- controllable audio equipment instead of adjusting your TV’s volume, use the steps in the left column of the following table. To switch back to controlling the TV’s volume, use the steps in the right column.
Control Audio Amplifier Volume |
| Control TV Volume | |
|
|
|
|
1 | Press MENU, select the | 1 | Press MENU, select the |
| Settings tile, and then |
| Settings tile, and then |
| select Remote Control. |
| select Remote Control. |
2 | Select Volume. | 2 | Select Volume. |
3 | Under Control Volume For: | 3 | Under Control Volume For: |
| use the down arrow key to |
| use the up arrow key to |
| highlight the AUX option. |
| highlight the TV option. |
4 | Highlight and select the on- | 4 | Highlight and select the on- |
| screen option to Save this |
| screen option to Save this |
| setting. |
| setting. |
MAKE SURE THE REMOTE | MAKE SURE THE REMOTE | ||
CONTROLS THE AMPLIFIER’S | CONTROLS THE TV’S VOLUME | ||
VOLUME IN OTHER MODES: | IN OTHER MODES: | ||
5Press the SAT mode button.
6Press the plus (+) and minus
7Your amplifier’s volume changes and the AUX mode button lights instead of the TV mode button.
5Press the SAT mode button.
6Press the plus (+) and minus
7Your TV’s volume changes and the TV mode button lights instead of the AUX mode button.
8
