Copy Paper
95
8
Important
❒If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
❒When using the bypass tray, we recommend you set the copy paper direction
to L.
❒When printing on envelopes, note the following:
•Load the envelope with the copy side face down on the bypass tray.
•Check that envelope flap is securely folded up.
•Before loading the envelope, flatten the leading edge (the side being fed
into the machine) by running a pencil or ruler across them.
•Use only rectangular envelopes.
•Some kinds of envelopes might wrinkle or the print quality may be affect-
ed, especially on overlaps.
❒If you load paper of the same size and in the same direction in two trays, the
machine automatically shifts to another tray when the tray in use runs out of
paper. This function is called Auto Tray Switching . This saves interrupting a
copy run to replenish paper even when making a large number of copies. You
can cancel this setting. See “Auto Tray Switching”, Copy Reference.
Reference
To add paper, see Copy Reference.
To change the paper size, see p.77 “Changing the Paper Size”.
Unusable Paper
R
CAUTION:
Important
❒Do not use any of the following kinds of paper or a fault might occur:
•Thermal fax paper
•Art paper
•Aluminum foil
•Carbon paper
•Conductive paper
❒Do not use copy paper that has been already copied on. Otherwise, a paper
misfeed might occur.
•Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or machine failure.
StellaC2_AEzen_F_FM.book Page 95 Monday, December 22, 2003 2:15 PM