System Settings (Parallel Connection)
39
4
System Settings (Parallel Connection)
Interface Settings/Parallel Interface
Parallel Timing
Specifies the timing for the parallel
interface. Normally, you do not
need to change this setting.
ACK inside
ACK outside
STB down
Note
Default: ACK outside
Parallel Comm. Speed
Specifies the communication
speed of the parallel interface. If
the speed is too high, data may not
be transferred smoothly. If this
happens, change the setting to
Standard.
High Speed
Standard
Note
Default: High Speed
Selection Signal Status
Specifies the signal level of the par-
allel interface.
High
Low
Note
Default: High
Input Prime
Specifies whether the prime signal
is active or inactive when an input
prime signal is sent. Normally, you
do not need to change this setting.
Effective
Invalid
Note
Default: Invalid
Bidirectional Comm.
Specifies, for instance, how a print-
er connected to the parallel inter-
face res ponds to a status request . If
you experience problems using an-
other manufacturers printer, set
this to Off.
Limitation
If set to Off, asynchronous com-
munication will not work.
On
Off
Note
Default: On
Signal Control
Specifies how to handle any errors
that occur when printing from a
computer or sending faxes. Nor-
mally, you do not need to change
this setting.
Job Acceptance Priority
Printer Priority
Note
Default: Job Acceptance Priority