Adjusting System Settings

41
4
System Settings Parameters

This section contains the information about the parameters used for the printer.

Reference

For more information about the other parameters in the System Settings

menu, see the System Settings manual.

Menu Description
1.Function Priority You can specify the mode (Copier or Facsimile) to be displayed im-
mediately after the operation swi tch is turned on or System Rese t
mode is turned on.
Note
Default: Copier
3.System Reset The machine returns to its prioritized mode automatically after
your job is finished, when you selected the time. This function is
called System Reset. The time can be set from 10 to 999 se conds,
or no system reset.
Note
Default: On (60 seconds)
You can specify the prioritized mode with the user tools. See
1.Function Priority.
6.Auto Off Timer The machine turns itself off automatically to conserve energy after
your job is finished, after the selected time. This function is called
Auto Off . The time can be set from 1 to 240 minutes.
Note
Default: 60 minutes
Auto Off might not be effective when an error message is dis-
played.
To return to the ready condition from Auto Off, the machine re-
quires the same warm-up time as the time for becoming ready
after power is turned on.
When the machine receives a fax or printer data in Auto Off
mode, it automatically prints the fax or the printer data.
13Measurement Unit You can select the measurement unit.
mm
inch
Note
Default: mm