Dixon ZTR 44/968999538 Cutter Blade Maintenance, Care And Maintenance, Blades should be discarded

CARE AND MAINTENANCE

CAUTION Stop engine and remove ignition key for

!safety. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.

CUTTER BLADE MAINTENANCE

Check sharpness of mower blades after every 10 hours of operation. Observe proper blade position prior to removal.

1.Safely raise front of mower.

2.Hold or block blade from turning.

3.Loosen blade bolt and remove blade.

4.When replacing blade, tighten blade bolt securely. Be sure blade is centered on pilot before tightening. See chart.

36" and 44"

50-60 ft. lbs. (68-81 Nm)

—Fig.5—

Deck Size: Tighten to:

36",44" 50-60 ft. lbs. (68-81 Nm)

42" 35 ft. lbs. (48 Nm)

Blades should be discarded
when worn excessively.		42"
		35 ft. lbs. (48 Nm)
		—Fig.6—
New blade
		DANGEROUS!
	When notch starts,	Do not use blade
		in this condition!
—Fig. 7—	discard blade

35