Dixon ZTR 44/968999538 manual Mower Deck Leveling Procedure, Care And Maintenance

CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE

1.Place mower on a smooth, level surface and rotate casters in the direction of forward travel. Tires should be inflated as follows.

Front	16	- 21	PSI (110-145 kPa)
Rear	8	- 14	PSI (55-97 kPa)

2.Put the mower deck in the mid-range cut height position.

3.Turn blade so the two outer blade tips each point outward.

4.Turn front adjuster nut(s) to level deck side to side.

5.Turn all bladed so tips point to the front and rear.

6.Turn rear adjuster nut(s) until blade is level to ¼" (6mm) higher in the rear, see Fig. 12.

NOTE: This will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions involved.

—Fig. 12—

41