Compaq 5532, 5531, 5525B user manual Operational Procedures

Chapter 3 Operational Procedures

15

17

16

26.Locate the TOF indicator (15). It is the small tab located on both the right and left tractor door.

27.Turn the vertical position knob (16) to align the top of the first print line with the TOF indicator. For best print quality, it is recommended the top-of-form be set at least 1/2 inch below the perforation (17).

A

B

C

28.Lower the forms thickness lever. Set it to match the paper thickness. (The A-B-C scale corresponds approximately to 1-, 3-, and 6-part paper thickness. Adjust until you have the desired print quality.)

29.Press CLEAR to clear any fault messages (such as “LOAD PAPER”) from the Liquid Crystal Display.

54