Compaq 5531 Ignore / DB8 Setup, IGP/VGL Emulation Offpage Errors, Barcode Errors, Ignore Nulls

IGP/VGL Emulation

Offpage Errors

•Disable. Does not report errors for elements that start or end beyond the right edge of the page.

•Enable. Reports errors for elements that start or end beyond the right edge of the page.

Barcode Errors

•Enable. An error message will print when invalid bar code data is encountered.

•Disable. Code V will not print an error for illegal bar code data; the bar code will be skipped.

NOTE: When Barcode Errors is disabled, the Code V emulation will try to make the best use of invalid data by either truncating extra digits or adding zeros to the end of bar code data to meet minimum data length requirements for some bar codes. Not all errors will be corrected.

Ignore / DB8 Setup

Following are several options which define character filtering and data bit 8.

Ignore Nulls

•Disable. None of the null characters (hex 00 or hex 80) are ignored.

•Enable. Null characters are filtered out of the data stream.

Data Bit 8

•Enable. The PI line is not passed directly from host to printer; all 8 bits are used for data bits, and characters in the hex 80-FF range can be accessed.

•Disable. When the host PI line is enabled, data bit 8 internally indicates PI line status. To use the PI line, disable data bit 8, and enable the Host PI configuration option (under the PI Control option, below).

109