Host Configuration
NetBIOS Using Print Manager Method
NOTE: In order to use this method, you must first configure the Internal Ethernet Adapter with a Microsoft Networks Workgroup name. This can be done by telneting to the Internal Ethernet Adapter, starting an npsh session with the unit, and issuing the following command.
store pserver smb workgrp workgroupname
where workgroupname is the name of the Microsoft Networks Workgroup that you want the Internal Ethernet Adapter to be included (e.g. Engineering).
NOTE: You must reset the Internal Ethernet Adapter for this command to take affect.
1.Ensure that the network connection is functioning properly between the Windows workstations and the Internal Ethernet Adapter. Try to ping or telnet to the unit.
2.Open Print Manager.
3.Select Connect Network Printer from the Printer menu or click on the appropriate toolbar item.
4.A list of known workgroups will appear. Double click on the workgroup name that you previously configured the Internal Ethernet Adapter under (e.g. Engineering).
5.Double click on the Internal Ethernet Adapter once the list of registered devices in this workgroup appears.
6.A list of destinations (e.g. d1prn) with NetBIOS service enabled will appear. These are read directly from the Internal Ethernet Provider. Select one of them.
7.Click OK.
This printer is now available for printing using NetBIOS over TCP/IP.
191
