Reloading Paper
A
B
C
9.Lower the forms thickness lever. Set it to match the paper thickness.
(The
NOTE: Do not set the forms thickness lever too tightly; excessive friction can cause paper jams, ribbon jams with potential for ribbon damage, smeared ink, or wavy print.
10.Press CLEAR to remove the “LOAD PAPER” fault message from the display.
11.Press FF several times to make sure the paper feeds properly beyond the tractors and over the lower paper guide. Feed sufficient paper to ensure the paper stacks correctly.
12.Close the printer cover. Close the cabinet front door.
13.Press ON LINE to place the printer in online mode and resume printing.
49
