Compaq 5525B, 5532 Printer Protocol, Print Char Set, CPI/LPI Select, Font Attributes, Typefaces

Chapter 4 EMULATION

Page Format

(from page 79)

Margins

Perforation

Skip

Form Length

* = Factory Default

Form Width

Left Margin 0* columns (0-369)

Right Margin 0* columns (0-369)

Bottom Margin 0* lines (0-451)

Disable* 1/2 inch 2/3 inch 5/6 inch 1 inch

Abs. Length IN	Abs. Width IN
11.0* inches	13.6* inches
(0.1-24)	(0.1-13.6)
Abs. Length MM	Abs. Width MM
279.4* millimeters	345.4* millimeters
(0.1-609.6)	(0.1-345.4)
Funct. of Lines	Funct. of CPI
66* lines	136* Characters
(1-192)	(1-272)

Printer Protocol

Select the LinePrinter+ protocol you wish to use. Refer to the LinePrinter Plus Programmer’s Reference Manual for more information.

Print Char Set

When this selection is displayed and the ENTER key is pressed, the current character set is printed.

CPI/LPI Select

This parameter lets you specify the characters per inch (cpi) and lines per inch (lpi) values.

Font Attributes

Typefaces

•Data Processing. A general purpose font printing at 120 dpi horizontally and 72 dpi vertically. The width of the font varies with each cpi.

•NLQ. A high quality font with serifs printing at 180 dpi horizontally and 96 dpi vertically. The width of the font varies with the cpi.

80