Chapter 4 HOST INTERFACE
Dataproducts Submenu
PI Ignored
Enable*
Disable
Data Polarity
Standard*
Inverted
Response
Polarity
Standard* Inverted
* = Factory Default
Latch Data On Prime Signal
Middle* Disable*
Trailing Enable
Leading
TOF Action
Reset*
Do Nothing
Buffer Size in
K
1*
Data Bit 8
•Enable. Allows access to the extended ASCII character set.
•Disable. The printer interprets bit 8 of each incoming data character as a zero, regardless of its actual setting.
PI Ignored
The PI (Paper Instruction) signal is used to control vertical paper motion.
•Enable. Causes the printer to interpret the eight data lines as DVFU commands when the PI signal is true.
•Disable. Ignores the PI signal and treats the data as characters or control codes.
114
