PCL-II Emulation
Page Length Representation
•Inches/Page. All page length calculations are based on the inches displayed on the panel.
•Lines/Page. All page length calculations are based on the number of lines per page displayed on the panel.
For example, if the form in use is 82 lines at 6 lpi, the page is physically 13.67 inches. Since 13.67 inches is not selectable from the Length in Inches menu, change the representation to lines, then set the number of lines to 82. The inches menu will display 13.6 inches although the printer internally keeps the exact form length of 13.67 inches.
Graphics Density
Graphics can be printed in 60 DPI (the default) or 70 DPI.
Perforation Skip
•Disable. Allows printing on page perforation.
•Enable. The printer sets up a
Display Functions
•Disable. The default. Control characters are not printed.
•Enable. Control characters are printed before they get executed. This is a useful debugging tool.
Line Terminator
You can specify what will be used to indicate the end of a line. Four options are available: LF after CR, CR after LF, CR after FF, and CR after VT. Each of these options may be Enabled or Disabled independent of one another.
77
