Menu
PRINTER CONTROL
PRINTER
CONTROL
(from page 69)
Unidirectional
Disable*
Enable
PMD Fault
Enable*
Disable
* = Factory Default
| Slow Paper |
| Power Saver |
| Slew |
| Time |
|
|
|
|
| Disable* |
| 15 min.* |
| Enable |
|
Unidirectional
The Unidirectional feature affects both print quality and printing speed. By setting this feature, you can configure the printer to print in both directions of the shuttle sweep (bidirectional), or to print in one direction only (unidirectional).
•Disable. The printer will print all data in both directions of the shuttle sweep (bidirectional printing). This choice produces higher printing speed.
•Enable. The printer will print all data in only one direction of the shuttle sweep (unidirectional printing). Although enabling this feature reduces print speed, it enhances the vertical alignment of dots and produces cleaner, sharper bar codes and text.
PMD (Paper Motion Detection) Fault
•Enable. In the event of a paper jam, an audible alarm beeps, “CLEAR PAPER JAM” appears on the message display, and the printer stops printing.
•Disable. You should disable PMD only if special paper requires it.
CAUTION Once PMD is disabled, paper motion is not monitored. If a paper jam occurs, the printer ignores the condition and continues to print, possibly causing damage to the printer.
123
