Compaq 5532, 5531, 5525B user manual Shift

Control Panel Keys

SHIFT

The printer must be offline to perform the following functions:

•Press SHIFT+CLEAR to reset the PCL-II emulation.

•Press SHIFT+L.P.I. Adj to access the line spacing menu. Press PREV or NEXT to scroll through the options.

•Press SHIFT+Page L. Adj to access the form length menu in lines or inches. The page length is selected by lines/page or inches/ page, depending on which option is chosen in the PCL-II submenu.

•Press SHIFT+= to micro step the paper upward in 1/72 inch increments.

•Press SHIFT+> to micro step the paper downward in 1/72 inch increments.

SET TOF

Sets the top-of-form on the printer. This key is active only when the printer is offline and will not operate if the printer is in a fault condition. The paper moves down to the print position and aligns to the top-of- form. See page 38 for the complete top-of-form setting procedure.

NOTE: If there is any data in the buffer, the paper will move to the last print position.

ENTER

When navigating the configuration menus, ENTER selects the currently displayed option value as the active value. An asterisk (*) appears next to the active value on the display. ENTER is also used for starting and stopping printer tests and generating a configuration printout.

NOTE: The ENTER key must be unlocked in order to function. See UP + DOWN, below.

45