Compaq 5531, 5532, 5525B user manual Format

Chapter 4 EMULATION

Slashed Zero

This parameter allows you to print the numeral “0” with or without the slash. This option applies to all character sets except OCR-A and OCR-B.

•Disable. Zero is printed without a slash.

•Enable. Zero is printed with a slash.

Page Format

Margins

•Left Margin. Set in columns. Column zero is defined as the far left edge of the page, and column numbering increments from left to right.

•Right Margin. Set in columns. Column zero is defined as the far right edge of the page, and column numbering increments from right to left.

•Bottom Margin. Defined in lines, starting from line zero at the bottom of the page and incrementing from the bottom up.

Perforation Skip

•Disable. Allows printing on page perforation.

•You may set up a skip-over margin of 1/2 inch, 2/3 inch, 5/6 inch, or 1 inch. For example, a skip-over margin of 1 inch allows a 1 inch margin at the bottom of the page.

Forms Length

Forms length is the number of lines that can be printed on a page. You can set forms length in inches, millimeters (mm), or as a function of the current LPI (lines per inch).

Forms Width

The forms width can be specified in inches, millimeters, or as a function of the current CPI (characters per inch). The forms width set should not exceed the actual paper width.

82