|
| RPRINTER Setup |
|
|
|
| Table 12. RPRINTER Setup | |
|
|
|
Step | Action | Result of Action |
|
|
|
|
|
|
14. | Press <Escape> until you are at the | Displays this menu. |
| PRINT SERVER CONFIGURATION |
|
| menu again. |
|
|
|
|
15. | Select QUEUES SERVICED BY | A list of defined printers for this print |
| PRINTER. | server is shown. |
|
|
|
16. | Select the printer you previously | An empty queue list comes up. |
| defined and press <Enter>. |
|
|
|
|
17. | Press <Insert>. | A list of available queues displays. |
|
|
|
18. | Select the queue you want this printer | Prompts you for a priority. |
| to service and press <Enter>. |
|
|
|
|
19. | Press <Enter> to use the default. | Returns to the queue list. |
|
|
|
20. | Press <Escape> until you have exited | Takes you to the command prompt. |
| PCONSOLE. |
|
|
|
|
21. | Start PSERVER. | Starts the PSERVER so the Internal |
|
| Ethernet Adapter can service it as an |
|
| RPRINTER. |
|
|
|
22. | In SYS VOLUME on the file server, | You will be at this prompt. |
| change to the \LOGIN directory. |
|
|
|
|
23. | Create a directory named after the | Creates the directory. |
| Internal Ethernet Adapter. By default, |
|
| this will be M_xxxxxx where xxxxxx |
|
| equals the last six digits of the unit’s |
|
| Ethernet address (e.g. M_000BF5) |
|
|
|
|
24. | Within this directory, create a file called | A blank file displays. |
| CONFIG and open it for editing. |
|
|
|
|
179
