Chapter 2 Install Basic Components
Load the Paper
When you start this procedure, verify that the printer cover is open, the forms thickness lever is raised, and the tractor doors are open. (See “Printer Component Locations” on page 18).
1 
2 
Legend:
1)Edge Of Paper
2)Box
1.For cabinet models, align the paper supply with the label on the floor. Make sure that the paper pulls freely from the box.
3
3
2.Feed the paper up through the paper slot (3). Hold the paper in place with one hand (to prevent it from slipping down through the paper slot) while pulling it through from above with your other hand.
34
